Standalone access controller with EM 125 kHz card reader, Wiegand 26/34, 12–24 V DC

This standalone single-door access controller combines a keypad with an EM 125 kHz proximity-card reader and Wiegand 26/34 interface.

Access and operation

• Access by card, PIN or card + PIN; capacity: 2,000 users/cards.
• Standalone, relay-toggle and Wiegand reader modes; backlit numeric keypad and two-colour LED indicator.
• Supported card technology: EM 125 kHz.

Electrical and interface data

• Operating voltage: 12–24 V DC; standby current: up to 30 mA; relay output load: up to 3 A.
• Card reading distance: 2–5 cm; Wiegand input/output: 26/34-bit; one supported door.
• One door-lock relay with NO, NC and COM contacts; adjustable relay activation time: 0–99 seconds.
• Connections: power, GND, Wiegand D0/D1, relay output, exit button and doorbell.

Installation data

• Operating temperature: -40°C to +60°C; operating humidity: 10%–90% RH; housing: zinc alloy.
• The supplier mentions water and dust resistance but gives no IP class; confirm environmental suitability before outdoor installation.
• Warranty: 24 months.